Bathroom Tiles and Ceiling Tiles Fixing in Interior designing and decoration

Bathroom Tiles and Ceiling Tiles Fixing in Interior designing and decoration

Battens of 2.5 x 1.5 cm are enough for most bathroom tiles. If they are tongued and grooved, no cross-pieces are necessary, but with some square-edge tiles it may be best to fit cross-pieces between the battens to give support on all edges. Pin the tiles through the edges, or use special clips that are hidden by the adjoining tiles.

Painting ceiling tiles

If you wish to paint your tiles, the ideal time to do this is before you put them up. Bear in mind that the surface of non- ceramic tiles is not necessarily robust, and so you need to take a degree of care to avoid damaging them. Use either emulsion or special fire-retardant paint. ever use gloss pain, since this can con- tribute to the spread of flames should there be a fire. Wood stains and varnishes in articles made of wood need treating with a preservative or finish, not only to preserve and protect the surface but also to bring out the inherent beauty of the grain and the texture of the timber itself.
The finish of the wood is an extremely important factor. Although painting would hide any slight surface defects, any blemish in wood is immediately accentuated when a clear finish, or a stain followed by clear finish, is applied. It is important, therefore, that all woodwork is clean and smooth before decorating work begins. When a clear finish is to be applied, it is essential that you give the surface a final sanding by hand, following the grain of the wood. If an orbital electric sander has been used at any stage, small circular scratches, resembling fish scales, will be seen in the final coat. ”

Finishes and their effects

  1. Sycamore:
  2. Matt polyurethane varnish
  3. Teak oil
  4. Painting and acrylic stain
  5. Gloss polyurethane varnish
  6. Liming paste
  7. Staining varnish.
Non-pigmented finishes

All finishes alter the color of wood to some extent, and some woods – mahogany and walnut, for example – turn much darker even when a completely clear finish is applied. An approximate idea of the color wood will take on when treated with a clear finish can be seen by dampening a small area with ordinary water. If this color is too light for your needs, then the wood can be stained before finishing. It is only possible to stain wood to a darker color; for a lighter shade it must be bleached. When staining wood, it is advisable to test the stain on an off-cut, or on an area that would normally be out of sight. It is notoriously difficult to remove stain, even immediately after it has been applied. If the wood has an open grain, and a smooth finish is required, then you will need to use a grain-filler to fill the pores . The alternative is to apply extra coats of the finish, rubbing down with an abrasive paper between coats.
Interior game offers complete training and interior designing services for interiors of Hotels and restaurants, Residential apartments and individual houses, Palaces and auditoriums, Exhibitions and functions, celebrations and meetings etc. Painting, Soundproofing and Gardening consultations and construction will be done by the company.

Leave a Reply

Your email address will not be published. Required fields are marked *