Acoustical products Home And Commercial Soundproofing By The Best Acoustical Soundproofing Engineers And Consultant Contractors

Acoustical soundproofing

 Residential soundproofing

Usually home sound issues coming through the windows and doors. Neighborhood noise and traffic noise disturb us during a relaxing stay in the home. We need soundproofing for windows, doors, walls, floors to control the level of external noise control.

Wall soundproofing

Wall soundproofing can be done with specialized acoustical MLVB with gypsum board covering . We need some sound absorbing materials as well to control the sound level inside the hall or room. Acoustical foam or wood related products like wood wool and glass wool as well as rock wool can be used to do soundproofing the room.

Floor sound control

Floor  soundproofing can be done with some sound deadening materilas which will not allow sound to pass through the floors. Combination of sound absorbing and sound blocking materials do the best for floor noise control.

Window soundproofing

Window acoustical soundproofing strips can be used for block the noise for sound control to a some extent. complete soundproofing can be done with special soundproofing materials and a new soundproofing window to control the noise at the best levels.

Door soundproofing

Noise through the doors can be controlled by acoustical doors made with six types of soundproofing materials added with barrium suphate. Soundproofing doors can be done with acoustical strips and tapes used in the edges to control the noise to some extend.

Our other acoustical; soundproofing products and services

Wall soundproofing, door soundproofing, window soundproofing, floor soundproofing, office soundproofing, conference hall soundproofing, false ceiling soundproofing, studio soundproofing, home theater soundproofing, recording studio soundproofing, dubbing studio soundproofing, generator noise control, cinema hall soundproofing, showroom soundproofing, Gym acousticals,

Dance floor soundproofing, auditorium soundproofing, soundproofing sports auditorium, school auditorium soundproofing, college auditorium acousticals, rehersal room soundproofing, music recording room soundproofing, audio mixing room soundproofing, hospital room soundproofing, operation theater soundproofing, audiological clinic soundproofing, lishtening room soundproofing,

School class  room soundproofing, meeting room soundproofing, dining room soundproofing, bedroom soundproofing, kitchen soundproofing, bathrrom soundproofing, reception hall soundproofing, lounch soundproofing,

Interior designing and decoration Color selection process in interior designing and decoration

Painting contractors in Kochi, Bangalore, Chennai

In Interior designing color selection process plays an important role to harmonize the interior designing theme and look better interiors at home and commercial estabilishments. And which colors harmonize is not set in stone, then give it three days before you make a decision. And by the way, while you’re looking at how well the colors play on your wall, also think about whether they harmonize with the other rooms in your home on interior designing and decoration. You don’t need to paint all your room’s one color or even stick to colors in the same tonal range. It is nice, though, if all those rooms have some common thread. It might be that the intensity of the different shades are on par, or that they all share a certain quality. In my oId house in Atlanta, for instance, the lower halves of the walls in the kitchen inteiors were painted a cantaloupe-y orange, the living room had a couple of walls painted mustard, and the bedroom was painted all in avocado.

Modular kitchen interior designing needs expert adice as the accessories have to be placed in a properway otherwise it would be difficult to work in the kitchen and dangerous too.

Wooden cabinets or PVC cabinets have to be fixed in considering the height of the people going to work in the kitchen. Everything has to be in the reach to save time in cooking. Usually place the refrigirator outside the modular kitchen, but at the sametime place it closer to the kitchen entrance.

Modular kitchen cost varies from 3 lakhs to 10 lakhs in Coimbatore, Kochi, Bangalore, Chennai, Hyderabad, Madural etc. Villas can have a larger space and you need to spend more to get all the luxurious amenities for a lavish kitchen area.

 

Interior Designing Carpeting Is An Inexpensive Method To Control Sound

Carpeting an Inexpensive Insulating Method for Soundproofing interiors in interior designing

Interior soundproofing is not nowadays very expensive ordinary products like carpets can be used for soundproofing interiors. Insulation blocks the loss of air conditioning and keeps homes and buildings cool during summer and warm in winter. Insulating materials of special designs are typically used to cover parts of a structure to control the temperature and sound, but the same can be done to some extent through carpeting.
Carpets are used as soundproofing materials as well as soundproofing, that is sound absorbing product to control the noise from external means. Carpets are not just floor coverings that hide ugly spots and keep your feet warm. Well-chosen types can retain heat and minimize reliance on HVAC systems. The material, weave and placement will decide just how well structures can be insulated.

Carpet Materials as Soundproofing Materials in interior designing

Wool: Before synthetic fibers came on the scene, wool was the extensively used carpet material. It is soft, luxurious, and retains heat wonderfully well. But woolen carpets are very expensive. When using woolen carpets for soundproofing as well as decorating purposes, the cost of the woolen carpets are not that much expensive.
Polyester: Polyester is cheaper, affordable, quite durable and retains color well in interior designing and decoration. It is not as strong as some other synthetic materials, but it depends on the weave. Polyester Carpets are also can be used as decorating product for interior designing and decoration. Though the soundproofing quality is less,it can be used for multipurpose in homes and commercial purpose like hotels and conference halls etc.

Nylon: Nylon is a quite durable carpet material for interior designing and decoration purposes. Though costlier than polyester, when compared to wool it is cheaper. It is resistant to dirt and mildew and doesn’t easily yield under the weight of heavy furniture. Soundproofing quality of Nylon is well and at the same time, it can be used for decorating purposes as it comes with various designs and sizes. It’s also made in different patterns and colors.

Olefin: This material is plastic-based and can resist moisture. It doesn’t easily stain and does not allow static electricity to build up. It is among the widely used synthetic carpet materials. Price-wise, it is comparable with nylon.

Silk: Pure silk carpets cost a lot, even more than wool. They’re meant for decorative purposes and cannot withstand heavy wear. Silk cannot be used as a soundproofing product as it has no sound controlling property in it. but some claims, it has some sound controlling effect, but it is not proved yet.

Pile Types for Interior designing carpets

Pile is the weave of carpets. It’s decided by the yarn or the style of the loop. Cut pile has the tops of the loops cut to the same height.
Loop pile has no cuts.
Twist pile has the yarn twisted and cut. This increases their durability.
Shag piles may be looped or cut but are longer and denser, used as bedroom rugs.

Types of Underlay for Carpet in Interior designing

Underlay also called padding of a carpet determines the level of insulation of a carpet in Interior designing. Too thin and badly designed underlay will drastically reduce its R-value. When using the carpet as a sound controlling material the thickness and the size can be measured to avoid the losing of sound controlling efficiency.

Flat rubber: Flat rubber is the fine product as soundproofing product and it is perfect product for sealing any sound and atmospheric leakage. Flat rubber has long life and is luxurious. It’s expensive and hard to find. It is not also as soft as some other pads. But it is a premium padding and need not be replaced when you buy a new carpet.

Waffle rubber: Made of spongy rubber, this padding has a texture like a hill-and-valley type,hence the fine soundproofing quality is assured. The carpet sits on the points (hills) while the valleys give the cushioning effect due to air pockets.  This is not widely used now, because it does not support carpet backings sufficiently.
Bonded urethane: Bonded urethane is made from bonded foam scrap. It’s quite durable but not as much as rubber.

Frothed foam: This is a kind of Urethane foam padding frothed in the liquid state. It resists wear and tear well.

In Interior Designing Carpeting Is An Inexpensive Method To Control Sound.

Our Products and Services

Acoustics, Acoustic wall paneling, Acoustic walls, Sound proofing, Noise control, Echo Elimination, Noise Isolation, Sound Isolation, Home Theater Construction, Home theater, Studio construction, Recording studio, Reverberation control, Echo control, Home Cinema, Noise and Vibration, Music studio construction,

Fabric wall panels, Absorbent panels, Noise Free Ceilings, Sound proof Doors, Noise Control in Homes, Noise control in theater, Sound leakage control, Indoor Sound Block, Sound Absorbing Materials supplier, Wall panels, Reduce Sound level, Block the sounds getting out, Sound Controlling door, Sound Control Material, Sound Proof panels,

Noise free homes, Recording studio Sound Control, Echo Controller, Echo minimize, Echo reducer, How to control echo, Noise free glasses, Noiseless Auditorium, How to control sound by wood, How can I record without noise, Noise proof window panels, Sound proofing suppliers in Bangalore, Sound proof at home, Sound control at gym, Best company for sound proof, Top companies in  noise control,

Top companies in acoustics, Top companies in noise control, Sound proof screens, Home theater essentials, Pleasant homes, Don’t allow the sound to go out, Block the sound, Soundproofing solutions, Sound proofing top companies list, List of companies in acoustics at Bangalore, Noise control in school, Sound proof wall treatment, Low cost soundproof materials, Best acoustics companies in India, Noise control solutions, Vibration control,

What should I do for control noise, How to build a noiseless home, How to maintain sound to not go out, Suggest some sound leakage blocking panels, Isolate the sounds, Transmission control of sound, Loudness controller, Noise barriers in India, Sound pressure level controller, Control sound by interiors, Control traffic noise, Soundproof insulation, Noise control sources,

Soundproofing Products,

Sonex, Ceiling, Wall Panels, Sound Control Curtains, Equipment Enclosures, Acoustical Baffles and Banners, Solid Wood, Veneer Acoustical Ceiling, Wall Systems, Professional Audio Acoustics,

Vibration & Damping Control Fire Retardant Acoustics, Hearing Protection, Moisture and Impact Resistant Products, Floor Impact Noise, Noise Reduction, Sound Absorbents, Noise Barriers, Fabric Wrapped Wall Panels, Acoustical Foam, Egg Crate, Acoustical Sealants and Adhesives, Outdoor Noise Control, Assisiing Listening Devices, OSHA, FDA, ADA Compliance, On-Site Acoustical Analysis, Acoustical Design and Consulting,  

ECHO ELIMINATOR, SOUND SILENCER, DBA PANELS, POLY MAX ACOUSTICAL PANELS, DECORATIVE FABRIC PANELS, HANGING ACOUSTICAL BAFFLES, SOUND ABSORBING FOAM, SONEX FOAM PRODUCTS, NOISE BARRIER-NOISE BLOCKERS, SCHOOL NOISE MANAGEMENT,

FLOORING UNDERLAYS, SEALANTS–ADHESIVES–GREEN, ACOUSTICAL CEILING TILES, SOFTWALL – WALLMATE, VIBRATION MOUNTS–HANGERS, HVAC PRODUCTS – SILENCERS, ACOUSTIC – SOUNDPROOF DOORS, ACOUSTIC ENCLOSURES, WALL INSULATION, ELECTRONIC SOUND LEVEL METER,

SOUND TEST-ACOUSTICAL ANALYSIS, ADJUSTABLE DOOR SEALS, DESIGNER ACOUSTICAL CURTAINSACOUSTIC WINDOWS – INSERTS, RSIC SOUND ISOLATION CLIPS, ACOUSTI-BOARD, OUTDOOR BARRIER WALL SYSTEM, ONE STEP DECORATIVE SYSTEM,

ACOUSTIMETAL PANELS, SOUNDSCREEN NOISE MACHINE, ACOUSTI-GASKET TAPE, T-MOLD SYSTEM, ACOUSTICAL FABRIC SELECTION, ADJUSTABLE SPRINKLER CUTTER, WOOD WOOL PANELS, TECHNO ACOUSTIC WALL PANEL.

Interior designing is everything

Building an interior in a house or in a commercial place gives value for the establishment. Imagine a  building without interior and exterior development? Would you agree that is a valid living place? A big No, A place for living means have to be arranged with necessary materials and furniture in it. It is learnt that any room or a closed place should have some basic designs and decorations to make the place livable. Interior decoration is an identity and the interiors can tell the taste and the culture of the owner and, of course, the wealth and status of the owner to the visitors.
Interiors are the statement of the owner that says what he likes and what not to be. A sense of ownership can be seen in the  interior designing and construction of any room or a place for business. The interiors are the showcase of the lifestyle of the users of the construction. Constructing interiors should serve the purpose for what it is constructed? It should be elegant and ecstatic and should not make boring after a view visits and spend time in that. It should be new on each and every visit made to the interior of any place.
 

Interiors with a taste of acoustics technology

Acoustic fabrics
Acoustic fabrics

Interior decoration without considering the health and mood of the people cannot succeed. It cannot impress the audience, if there is a noise problem that reduce the quality of the sound. Sound is one of the major issues we face in the self erected home theaters. Some people may rightfully think that we don’t need an expert to build our own home theater,but actually constructing an interior is not that much easy task. We need to think about the design factor scientifically. Use of complete science related to health issues.
Some colors are harmful for us if viewing continuously. For example if the red color employed in most of the parts of the interior increase the blood activity. And at the same time yellow and the orange are gives us a fresh energy that helps us to make the day without any stress and tiredness. White and blue colors provides us a peaceful and calm atmosphere.
Acoustics technology is an added value to the current world of interior designing and technology. it provides many safety factors for our health. The professionals in “Moov Group” are well trained to handle any issues in the home theater. Interiorsin.com company Moov Group company provides the acoustics technology those who want the best in sound engineering and clear audio visuals to enjoy the home theater well. Where ever we see pubic crowed there might be some noise except library and Temples and mosques while praying.
Viewing any cinema with sound issues harm our ears and over a period of time health. The best home theater should deliver the purpose for what it has been developed and constructed. it needs a great professional skills to make the home theater cinema viewing experience a wonderful one.
Remember us wherever there is a sound and noise pollution call us for a free consultation and spot visit to understand and solve the issue. Moov Group,with a vast experience and knowledge base assures you to solve the soundproofing issues.
Phone No: +971 4331 0000
Mobile: info@moovtechnology.com

interior designing and decoration tiling the walls- Large area tiling technics

LARGE AREAS
Plan the work carefully, so that you do not have to cut tiles at external corners or along the top of half-tiled walls. You must start from a level line at a height to suit the overall plan of the tiles, such as skirting board. However, most skirting is not level and you may want to fll1ish the wall with a new skirting over the bottom edge of the tile. You may also have problems tiling above windows and doors. The solution is to fix a temporary batten to the wall to support the first row of tiles you lay.
Decide on a suitable starting point, an exact number of tiles from the top of a half-tiled wall, or in line with existing tiles over a window or doorway, and fix the batten in place with masonry nails. Check that it is exactly level with a spirit level. Spread adhesive and lay tiles as before, working upwards from the batten. Some ranges of tiles include special fittings, such as soap dishes and towel rail fittings.
 If you are using these accessories, they may be a little heavy, so hold them in place with sticky tape until the tile adhesive is dry. Finally, fill in to cut a thicker tile, score the cutting line and position the jaws of the snapping tool on either side of the marked line and squeeze to make a clean break. Use a tile sanding block to smooth the cut edges. To cut tiles to fit around awkward shapes, nibble at the area to be cut away with a pair of pincers after you have cut a template from paper and traced it onto the tile.
When the whole area is tiled, leave the adhesive to set – normally at least 12 hours. Then spread tile grout over the surface, paying particular attention to the gaps between the tiles. Immediately clean the grout off the face of the tiles with a sponge, rinsing it out frequently.
TILING WALLS
TILING LARGE AREAS
Plan the work carefully, so that you do not have to cut tiles at external corners or along the top of half-tiled walls. You must start from a level line at a height to suit the overall plan of the tiles, such as skirting board. However, most skirting is not level and you may want to finish the wall with a new skirting over the bottom edge of the tile. You may also have problems tiling above windows and doors. The solution is to fix a temporary batten to the wall to support the first row of tiles you lay. Decide on a suitable starting point, an exact number of tiles from the top of a half-tiled wall, or in line with existing tiles over a window or doorway, and fix the batten in place with masonry nails. Check that it is exactly level with a spirit level. Spread adhesive and lay tiles as before, working upwards from the batten.
Some ranges of tiles include special fittings, such as soap dishes and towel rail fittings. If you are using these accessories, they may be a little heavy, so hold them in place with sticky tape until the tile adhesive is dry. Finally, fill in ” 2 around the lower part of the wall, or neater the area around the top of the window or door with part tiles. When dry, apply grout and polish up the tiles. If you have to drill into tiles to make fixings after they are laid, use a slow drill speed and choose round or dome-headed non-rust screws.
 Plan the work carefully, so that you do not have to cut tiles at external corners or along the top of half-tiled walls. You must start from a level line at a height to suit the overall plan of the tiles, such as skirting board. However, most skirting are not level and you may want to finish the wall with a new skirting over the bottom edge of the tile. You may also have problems tiling above windows and doors.
 The solution is to fix a temporary batten to the wall to support the first row of tiles you lay. Decide on a suitable starting point, an exact number of tiles from the top of a half-tiled wall, or in line with existing tiles over a window or doorway, and fix the batten in place with masonry nails. Check that it is exactly level with a spirit level. Spread adhesive and lay tiles as before, working upwards from the batten.
Some ranges of tiles include special fittings, such as soap dishes and towel rail fittings. If you are using these accessories, they may be a little heavy, so hold them in place with sticky tape until the tile adhesive is dry. Finally, fill around the lower part of the wall, or neaten the area around the top of the window or door with part tiles. When dry, apply grout and polish up the tiles.
If you have to drill into tiles to make fixings after they are laid, use a slow drill speed and choose round or dome-headed non-rust screws. Place a piece of adhesive tape over the tile to prevent the drill slipping while you work.  

Re-cycling fabrics with efficient patchwork – Interior designing and decoration tips and guidance

PATCHWORK COVERLET

Patchwork was originally developed as a method of re-cycling fabrics, but has developed into an art form. This basic machine method based on simple shapes like the square and triangle is a time- saving way to re-create the effect. Quilting can be done after all the patches are sewn together. Cut out all the shapes with the same seam allowance so that they match up at the seam lines when the units, or blocks, of smaller patchworks are sewn together into the final throw over. The instructions here are for the simplest throw over made from squares that are all the same size (or you can assemble triangles to the same size as the squares shapes like the square and triangle is a time- saving way to re-create the effect.

Quilting can be done after all the patches are sewn together. Cut out all the shapes with the same seam allowance so that they match up at the seam lines when the units, or blocks, of smaller patchworks are sewn together into the final throw over. The instructions here are for the simplest throw over made from squares that are all the same size (or you can assemble triangles to the same size as the squares).

MAKING QUILTS For variations of pattern, plan the arrangement of squares on graph paper before you start, using crayons or colored pens to organize the color sequences. You can increase the number of fabrics you use so that the whole is graded in tone from the center outwards, Choose three or four coordinating fabrics and cut them first into strips, 12 cm (4i in) wide, and then into squares of the same measurement. 

Press under 1 cm (i in) wide turnings all around each square. Take the first two squares, in two different fabrics, and join with a flat seam. Join further squares to the opposite free edges, keeping the different patterns in the same order. Join enough squares to make a strip the length of the finished guilt, Make up further strips until you have enough to fit the width of the guilt. Plan the strips so that each one starts with a different fabric in the sequence. Press all seams open and clip across corners of seam allowance, Join the strips in the same way as the squares, being careful to take precise 1cm seam allowances. 

Check the arrangement of the strips before stitching so that they form diagonal bands of pattern. Press the seams open. Make up the guilt with a plain backing panel and a piece of wadding the same size as the patchwork panel, and bind the edge. When joining triangles to form’ a square, match the raw edges carefully or the resulting seam will be incorrectly aligned. 

Hand sewing curtains in interior designing and decoration for windows and doors

HAND SEWING CURTAINS
Use dressmaker’s chalk to mark the pleat fold lines on the back of the ungathered curtain, according to the calculations. Fold and- stitch along the pleat lines in a straight line to 10 cm (4 in) depth, then 4 fold each pleat by hand. Stitch the base of the pleat by hand, and catch the inner folds together at the top. Insert spiked hooks- into each pleat.
 WINDOW DRESSING SWAGS & TAILS
Swags and tails are fixed to a shelf above the window. There are no text-book rules for proportions, but as with all window dressing, if you want plenty of light to come through the window, fit the shelf well above the window and extend it on either side. Norm- ally, the first pleat of the tail should be at about the same level as the lowest point of the sweep of the swag. When making your own swags and tails, it is worth using old sheets to make a mock-up or toile of the finished item. The upper edge should be about 50 cm (20 in) shorter than the shelf, and the lower edge about 20 cm (8 in) longer, according to the depth of the swag.
 Decide on an appropriate depth for the tails, depending on the fullness required. Pin the toile across the top of the shelf to give the effect, pleating or gathering the ends. When you are happy with the arrangement, mark the fabric where it folds over the front edge.
Open out the taile and mark the seam line following the existing marks. Use this as a guide to cut out the fabric, allowing 4 cm turnings along the top and bottom edge, and 10 cm (4 in) for gathering and finishing down the angled side edges. Make up the swag, lining and interlining if necessary, as for machine- or hand-made curtains, treating the upper and lower edges of the swag as the sides of the curtain. Gather or pleat the angled sides along the seam line and pin in place to check the drape. Topstitch, then trim the raw edges and finish by binding or zigzag stitching.
To make a toile for the tails, plan the width and spacing for the fold lines using a tape measure held along the top of the shelf. Decide on the inner and outer lengths of the tails and transfer all the measurements to the toile fabric. Cut out and check for fit. 4 Use the toile as a pattern piece, allowing 2 cm G in) turnings all around the sides and lower edge, and 10 cm (4 in) at the top edge. Cut lining to the same size as the main fabric. Interline the main fabric panel, then position the lining on the tail, right sides facing, and stitch together all around the sides and lower edges. Trim scams, press and turn right side out.

Press again, then mark and press the pleats into position. Check for fit, then top- stitch pleats, trim raw edges and bind or zigzag stitch together. 5 Finally, fit the swags and tails in place, stapling them to the top of the shelf so that the tails overlap the ends of the swag.

Making Cushions for Your home – Interior designing and decoration tips- Guide

CUSHION

Cut out a fabric panel for the top of the cushion, making a template if necessary. Include a 12 mm scam allowance. For the back, cut two panels of fabric to fit the cushion allowing 2.5cm extra for the zip to be inserted across the panel. Make up a welt to fit tightly around the cushion pad. Clip into the scam allowances at the corners. 

If the cushion is round or awkwardly shaped, cut the welt on the bias to make it easier to fit. Fit piping all around the upper and lower panels if required. With right sides facing inwards, fit the top and base panel to the welt and pin. If the cushion is to be tied in place, make up fabric tics and pin them into the scams at the back corners. Remove the pinned cover by opening the zip and machine stitch the scams.

Clip scam allowance across the corners and notch curved scams as necessary (  198). The zip can be inserted into the welt in which case measure up for two lengths of fabric to make up the welt, one that extends around adjoining corners by 5cm both ways. This piece needs to be 2.5 cm wider than the other welt piece so that it can be split down its length to insert the zip. With the zip open, right sides facing and raw edges matching, sew around the cushion. Turn right side out. Press before inserting the cushion pad.

MAKING CUSHIONS BOLSTER CUSHION

Before cutting the fabric, decide whether any pattern should run along or around the cushion. Cut a rectangle of fabric long enough to wrap around the bolster pad, with 12 mm seam allowance down all sides. Make the rectangle into a tube to fit around the pad, setting a zip into the seam. Fit on to the pad wrong side out, and clip into the seam allowance. Cut a circle of fabric for each end of the cushion, including the same seam allowance.

Apply piping or frills around the edge if required. Fit the circles on to either end of the tube, wrong side out, and tack along the seam line. Remove the cover from the pad and machine stitch scams. Layer and notch seam allowances and press towards the circles. Press, and then turn right side out and press again before inserting the cushion pad. You can decorate the end of bolsters with tassels, rosettes, covered buttons etc. 

Interior designing and decoration window dressing tips

SWAGS & TAILS WINDOW DRESSING LACE & VOILE
The prettiest and most romantic of fabrics, lace gently filters light into a room whilst ensuring privacy. Usually light in color, lace has distinctive qualities of texture and drape, spangling sunlight, creating shadows and fluttering in the breeze from an open window. Muslin and voile, either plain or sprigged with flowers and garlands, can be turned into wispy swags or brief draperies to head a classic window, or they can be reefed up into festoons.
But these fine fabrics drape gloriously when generous lengths are looped and swathed around curtain poles and allowed to descend in full-length cascades, or a full curtain can be knotted halfway- down to flare out again at the hemline. Sheer curtains can overlap across the full width of a window and then be tied back in graceful loops, one side set higher than the other and the overlapping edges accentuated with tassel trimming.
Figured lace should be used much more sparingly than muslin or voile. Lace curtains need very little fullness; in fact some panels look most effective when hung flat against the window using a cased heading or curtain rings and a slender pole. Lace panels with integral borders running round three sides sometimes have a lightweight drawstring tape across the top, stitched so that it doubles as a cased heading. Pelmet (valance) lace is also available and can add a further layer to a lace window treatment. 
When voile or lace curtains are needed for privacy, sew cased headings and slot the fabric in un-join widths (to avoid ugly seams) on to rods at both top and bottom, anchored within the window frame so that they hold the fabric lightly taut across the face of the glass. This method particularly suits French windows and glazed doors and is essential to hold fabric close to pivot and sloping windows.
 The casings top and bottom are made with two lines of stitching, forming a (stand’ or heading. Simple ties draw the curtains in at the waist. A plain roller blind screens the top part of the window, and can be drawn down necessary. RIGHT A pair of lace panels has been fitted over a slim brass rod to hold these curtains close to the frame oj these generous bedroom windows. The width of each curtain allows for gentle gathers hut still shows off the pattern of the lace.
WINDOW DRESSING MAKING LACE & VOILE CURTAINS
 To show off intricate patterns on panels of lace, whether antique or contemporary, you need very little fullness. Use either a cased heading or clip-on rings to achieve this effect. Take particular care when measuring for lace panels: if they are hung by rings from a pole, measure from just beneath the pole; if they are hung from a plain track or rod, measure from the top of the fixture. Headings for any type of sheer curtain fabric may be made in a number of ways, depending on the nature of the fabric and the effect you want.

 A cased heading, which enables you to slot the fabric onto a curtain rod or wire, is the simplest to make. For more formal gathers there are special lightweight curtain heading tapes. Because of the transparent nature of the fabric, seams must be made as invisible as possible with borders arranged carefully around the edge of the curtains. Allow ample fullness with fine voile and other fabrics – up to three times.