Quick Guide to Sound Isolation and Noise Control
Acoustic treatment of any space will always face the situation wherein you have to find a solution for stopping noise from passing through a wall. And the typical solution involves sealing of leakage of noise through gaps between doors and floor, windows and ceiling joints as well as vibrating structures transmitting sound waves across solid material.
Sound Isolation and Noise Control
Noise leaks can pass through air or through structure. And in contrast with popular belief more sound leaks through structures faster because sound passes through solids than through air. Therefore we have two methods for solving the problem of sound reduction, by building alternate layers of space and mass. While space restricts the travel of structural noise, mass suppresses the noise. So the fundamental principle of isolation of sound involves creating a wall of mass, air gaps, and more walls thereby lessening noise transmission. This may look simple only theoretically; but if you go in detail through the matter, it will take up a significant amount of ground work and time before we can identify the exact points of sound leakage of sound and problem spots. And if you have to accomplish it with an existing structure and walls, it is going to be very difficult because it makes it necessary to have made-to-order sound proof rooms, walls and windows.
Environmental Issues noise pollution
In case you are planning to build a sound isolation room or booth it must be kept in mind you may have to deal with environmental problems. Avoid building your structures close to areas of heavy traffic or railway tracks. Sound vibrations from heavy vehicles and cars can be transmitted through walls, and hence there must be an action plan ready for meeting any eventual short comings. Every individual situation has its own typical solution. So it is important that you discuss the possible options with a sound specialist who has experience in solving sound isolation problems.
Treating Doors and Windows
Also, it is to be remembered that windows and doors are important in soundproofing. The problem of sound leaking through gaps in doors and windows is quite serious. So windows and doors must be treated with sound proof seal. It is recommended that noise lock doors and windows may be installed. Multiple glazed windows, with laminated glass will help to lessen noise considerably. They are priced competitively when compared normal glass. They are safe too. Special sound lock doors which are cored and sealed like bank vault are recommended.
After attending to all the details of walls, ceilings, floors, doors and windows you must ensure that your electrical requirements like lighting in interior designing and decoration are estimated. Particular attention is to be paid to wiring to avoid any unnecessary interference to noise control work. Once you have considered all the possible problems and discussed your plans with interior designing sound specialists, you can proceed with your next step, that sound proofing of your room or business.