Posted on

Music Recording Studio – How to get the Quality Sound and recording?

 Get close to the Micin Recording Studio Room

Make sure your mouth is four-12 inches far from your mic. Test with the gap, but what you’re going for right here is to make certain the voice is recorded as loud as possible with out overloading the mic or inflicting unpleasant seems like p-pops. The echo sound may disturb you while voice output goes at higher pitches. To avoid this We need to install Acoustic soundproofing products and materials to ensure arrest the echo in the Auditorium.

Considering we’re using a laptop recording studio for this, it is pretty easy to peer in case your voice recorded loud enough or too loud. The voice will show up in recording software as wave paperwork (or “squiggly blobs” as i love to name them) in what looks as if a swim lane in your display

  1. file In a Quiet Room- it’s almost impossible, specially with a computer recording studio, to have a very noise-free surroundings in which to report. However the lower the noisiness, the higher. manipulate what you may. for instance, close the door to the room where you report to hold out the household noises. Now and again the use of acoustical blankets or acoustical mattresses strategically can sincerely assist right here. simply do not block the computer vents or it may overheat.
  2. Soundproofing blankets and noise control fabrics like mattresses as well as acoustical curtains can be used as to control the sound and noise created in the Audio Music recording studio.
  3. reduce The Noise- After it is Recorded most recording software (together with the open-source Audacity) comes with fundamental sound editing gear together with noise gates and noise reduction. for the reason that there probably could be a few noise, however little, in the recording (you can’t prevent it all), you’ll need to hire one or both of the above editing tools. I advocate attempting the noise gate first. so one can shut out all noise at some stage in the silent bits when the voice isn’t talking, at the same time as allowing all audio (noise covered) to bypass via when the voice is speak me
  4. Squish the Audio With a Compressor– It is simple to break audio with an excessive amount of it. properly used, jogging this enhancing tool with even the audio extent in order that the listener can pay attention the softer, quieter parts AND the loud, interesting components, without having to continuously turn the volume knob up and down. A compressor will lessen the volume of just the components that are over a certain loudness stage (you pick this level), leaving the quieter audio by myself. This allows you, the audio writer, to growth the overall extent of the voice over without any of it being TOO loud.
  5. Normalize- The last thing I normally do is apply one more audio editing tool called normalization. All this indicates is to growth the audio quantity right as much as the factor before the very loudest bit could distort. for example, if there has been a yelling bit within the voice over, that part will display up as the “tallest” little bit of wave form within the swim lane. so normalizing unearths that tallest (loudest) bit and turns the whole lot up till simply earlier than the tall part touches the side. This ensures the audio is as loud as viable without distorting.
  6. Acoustical soundproofing products are essential to control the sound and noise arising in the auditorium and the recording studio. Mass loaded vinyl barriers and cement board sidings can be used in the floors and the walls to arrest the sound and noise as well as echo in the recording studios.
Posted on

Things you probably never knew about acoustic soundproof foams!

While designing the interiors of your home, there are many aspects you have to consider. Aside from appearance, lighting, or acoustical properties of the room are some of the things you have to consider. Soundproofing your room will have a great effect on the ambience and noise in the room, which in effect affects the mood and performance of people who use the room. Thus soundproofing your room or building is essential. But before changing the interiors of your room, have you thought about what all materials you need to use for it, will it be effective, or whether you will have to tear down and reconstruct any part of your building? It will be a hassle if you have to tear down an entire wall just to make the room soundproof from external noises! Soundproof foam or acoustic foam is the solution to your problem.

Acoustic foams or Soundproof foams are lightweight material made of polyurethane foam. It is usually cut into tiles in pyramid or wedge shapes, which can be placed on walls of recording studio or similar places to absorb sound and thereby enhance the quality of sound in the room. It reduce the amplitude of sound waves by increasing air resistance. The energy of sound waves is dissipated as heat. Thus it eliminates echoes and reverberations. By controlling reverberations, it eliminates echoes and background noises. Thus, unlike other soundproofing materials, acoustic foams absorb reverberations rather than blocking sound from entering or leaving the room.

Apart from soundproofing your room, acoustic foams also provides insulation against drafts. So that is a two-in-one benefit for you.

Installing soundproof foam

The biggest advantage of an acoustic foam is the fact that you don’t have to tear down a whole wall just to install it. It can be added through the attic of your home. From there it will find a place in the interior of your wall, adding a new insulating layer and thus providing you with a quiet home. It will completely go down the walls and fill every gaps and holes, including electrical outlets and light fixtures. These gaps and openings can reduce the energy efficiency of your home. Thus filling these gaps and openings with foam will help reduce the energy bill.

More things to love about soundproof foams

In addition to energy saving, soundproof foams also get rid of your noise problems. It will save you from having to try other soundproofing methods. While soundproof foams are being installed in your house, you will be able to use every room in your house. Labour cost is also low compared to other soundproofing methods.

Though acoustic foams have the above mentioned advantages, the best aspect of using acoustic foam is its noise absorbing properties. In places where absorption of sound is required to improve the acoustics of the room, like concert halls, churches etcetera, acoustic foams are used. Since these places have flat surfaces, sound can hit them and easily bounce off.

For soundproofing your interiors, using soundproof foam is a good idea. Soundproofing your rooms will enable you to carryout your daily activities without any interruptions and subsequently, not interrupting your neighbours. Soundproof foams are available in different sizes, shapes, thickness and colours. They can be easily attached to walls, doors, ceilings etcetera, to control reverberations, echoes, and noise levels.

Posted on

Why do you need to soundproof your office space?

While designing the interiors of an office, have you considered soundproofing it? If you haven’t soundproof your office yet, it is high time you should. But you are obviously wondering, what is the need to soundproof an office and what are the ways with which soundproofing is possible in offices? Your all queries will be answered once you reach the end of this article.

Need of soundproofing

As most of us know, sound is a form of energy that is associated with vibration of particles. When particles vibrate in a frequency that lies within the audible range, 20 to 20,000 Hz, it is called as sound and we will be able to hear it. Noise is also sound but it is simply unwanted sounds that adversely affect our performance. The effect noise has on us is more than what we imagine. Excessive noise has physiological, psychological, and communicative effects on us. While working in an office, excessive noise can cause mood changes, headaches,or even disrupt communication, which can affect the performance of employees. This is why soundproofing is essential.

Noise in an office can be external or internal. External noises can include the sound of horns or vehicles passing by or even a dog barking, that are generated outside of the room. Internal noises are created within the enclosed space due to the activities of human or electronic devices. External noises enter a room through walls,floors, and ceilings, and can be easily eliminated by soundproofing them.

Ways to soundproof

It is desirable to reduce the noise levels inside office spaces for the employees to be able to work to the maximum of their potential. To keep limit noise levels, the acoustics of offices may be altered. Soundproofing methods will help reduce noises. Some of the ways are

Soundproofing will either completely absorb or simply reduce noise. Absorbing sound is achieved by getting rid of echoes and reverberations. Reducing sound is possible by stopping the sound waves from travelling.

Benefits

One of the benefits of soundproofing is that it will enable smoother communication between individuals and also block the sound from travelling to other parts of the room disrupting communications at that place. It is the best method to eliminate noise pollution in an office. Various soundproofing materials available are also attractive and efficient. There are fireproof acoustic materials.

The arrangement of acoustic materials bought, as well as its quality, is pivotal in deciding the acoustical properties of a room. The right arrangement of the right materials will lead to a top quality soundproof room that provides an optimized working environment for the employees which has marvellous effects in their productivity. Due to this reason, though soundproofing may seem like an unnecessary doing, it is a must when designing the interiors for your office. You can either include soundproofing methods while constructing the building/room or redesign it to meet your soundproofing needs. Talk to an interior designer about soundproofing your office space. Visit http://www.interiorgame.info/ for expert opinions and services on soundproofing.

Posted on

How an interior designer is different from an interior decorator

Interior designer and interior decorator are two terms that are often mistaken for one another. To learn the difference between the two, it is necessary to learn the definition of interior designing and interior decoration first. It is one’s lack of knowledge about these two fields that result in such unintended mixing up of them. For the usage of words in the right context, one needs to have a good understanding of the two fields.

In many places, we see that interior designer and interior decorator are used as interchangeable words, one a synonym of the other. Then to what extend is an interior decorator different from an interior designer?

Let us know who is an interior designer and what does he do.

The difference can be explained in the simplest way like this. The word interior designer, as it suggests, is basically a person who designs the interiors of a space and interior decorator, is a person who ‘decorates‘ and furnishes the interiors. Though the definitions of both seem the same, the scope of an interior designer’s jobs is much beyond that of an interior decorator. Both are responsible for the interior furnishings but interior designers have the ability to decide whether a wall should be torn down, the kind of flooring, lighting, windows etcetera that should be used, also the electrical works of the room, and the different furnitures and accessories that should be used. Thus, the scope of an interior designer includes that of a decorator but goes beyond that.

  • Education

    Interior designing existed centuries ago and were prevalent in many civilization but it was not a defined field of study. But for the past few decades, the importance of the interior of rooms have increased drastically, and hence interior designing has evolved into a field of study with different branches of specialization. A formal education and degree is needed for interior designers to be taken seriously. On top of this, they have to sign up under an experienced professional and do apprenticeship, to be able to start working as an independent interior designer.

    On the other hand, there is no special schooling for decorators, as they focus on aesthetics. They don’t generally take part in structural planning or renovations. Their part comes after the construction is complete and focus on the space available for decoration. There are small courses for interior decorators that focus on room planning, colour and fabric and so on.

  • What do they do

    Interior designing is the art of designing interiors, sometimes exteriors, of a building or a room. The designing process, though it may seem simple to one, is one that needs good knowledge about different trends, methods, and technologies, that can be used to enhance the ambience and aesthetic appearance of a room, the mood and quality of the occupants, and make sure the rooms serve their purpose or are optimized to perform their best. An interior designer is basically the professional who basically does interior designing of homes, offices, shops etcetera.

    Interior decoration is the profession of planning the decoration and furnishing of a room or a building. An interior decorator is a professional who either makes plans for decorating a room or decorates it himself.

  • Who they work with

    Interior designers work closely with contractors and architects to help meet the clients demands and needs depending on what purpose the space is serving.

    Interior decorators work with upholsterers, furniture manufactures, and the sort to furnish and decorate a room. They do not work with architects and contractors because, by the time their role starts, the construction would be complete.

  • Designer or decorator?

    The answer should depend on your needs. If you want to design the interiors of your room including structural changes like, adding new windows for ventilation, removing a wall, moving electrical and plumbing works around, etcetera, you should hire an interior designer.

    If you only want to furnish your room according to your tastes, go for an interior decorator.

Interior decorators are cheaper than interior designers but interior designers are professionally trained to understand your needs and tastes, and accordingly make a design for the interiors of your home. In the end, it depends on your needs and constraints. But as of now, you have learned the difference between an interior designer and an interior decorator, and what to call whom.