interior | MN Acoustics

September 20, 2018

Spray Foam Insulation To Arrest Sound and Noise by Acoustical soundproofing Contractors and Consultants

Spray Foam Insulation

Whether it be the construction of a new house or remodeling the existing one, insulation is the vital factor. The options are plenty, only you have to take the correct decision. There are many pocket- friendly products, but they may not be the correct solution ultimately. Likewise, there are costly products that can save a lot on your power bills over a period of time.

About spray foam insulation

Spray form has two compounds, isocyanate and polyol resin used in its manufacture. They expand when they are mixed together. By storing the compounds separately, they will have a long life. Once they get mixed, they become foam and must be used immediately. On application to a surface, it becomes hard in a short time and works as a great insulating layer. Also, it is long-lasting.

Spray foam insulation works better

Compared to other forms of insulation spray foam is more effective. Its R-value of resistance is very high and ranges from 6 to 7.7. Insulators with higher density will have higher R-value and hence more effectiveness. For comparison, fiberglass insulator has only R-3.5.

Benefits of spray foam insulation

One major advantage of spray foam insulation lies in the process of its application. The whole process is so easy and has no hassles. Irrespective of the surface, vertical or horizontal, you can apply the insulation. It is easy to spray the foam across the chosen surface area in a totally uniform manner. No cutting mats or measurement is needed. Also, the wear and tear of this spray foam is comparatively less and its life is longer.

Why is spray foam insulator efficient?

The process of application is very fast. It also hardens and sets very fast.
It is easy to apply and does not need any measuring and accurate cuts.
It expands on application. So, the insulation becomes airtight and watertight, making it a great seal.
The spray foam insulation keeps your home interior warm in the winter and vice versa in summer.

Spray foam insulation and mold infection

Some variations of the foam comprises of microbial agents. It can be very useful for preventing mold growth. If you are living in a humid area, your home might quite likely become mold-infected, which go unnoticed till it is too late. This will affect the health of your family.

This insulator is also helpful in preventing and vermin and insects getting inside your home. So it seems to be a very good way to protect your residence using the spray foam.

The demand for spray foam insulation has increased multi-fold in the last few years. We have seen the many benefits that this type of insulation can offer.

Call us for the best acoustical treatment and soundproofing to control sound in commercial places and auditorium, Conference halls, Home theaters and restaurants etc.

Our Acoustical soundproofing Products and materials

Noise stop vinyl barrier, soundproof windows cost in India, matt emulsion, soundproof studio foam, bedroom interior design in Hyderabad, glass door fittings in Hyderabad, decorative foam ceiling tiles, window blinds Mumbai, acoustic tiles for walls, interior designers, blinds, plumber, interior designers in Hosur, home interior design in Tamil Nadu, interior design, interior, interior decoration, wooden curtains, blinds for windows.

How to setup a recording studio in your home, home design, home interior products, house design, adjustable bed, soundproof ceiling factory, acousti-gasket tape, interior ceilings, false ceiling contractors Bangalore, false ceiling contractors in Bangalore, false ceiling dealers in Chennai, false ceiling contractors in Chennai, mass loaded vinyl alternative, acoustic board.

Poly max acoustic panels, theme based interiors, SEPS insulated decorative wall panel factory, sound absorption material suppliers, soundproofing a gymnasium, sound absorbing materials suppliers, cheap baffle ceiling, noiseless acoustics, echo eliminator, soundproof curtains India.

September 17, 2018

Soundproof Flooring and Acoustic Foam A Great Home Theater With Acoustical soundproofing Products by contractors

Soundproof Flooring and Acoustic Foam – A Great Home Theater Experience

Suppose you are thinking seriously about constructing a great home theater, then, surely, things like a wonderful HD screen, a high-power projector, a good stereo system are all required. But what is overlooked by many is the appropriate acoustical design of the room for home theater. This article will explain two important points to realize a wonderful home theater, and also the reasons why you will get a good return on your investment when compared with all the remaining costly equipment that you have. The two factors are: Acoustic foam and soundproof flooring.

Acoustical foam to arrest sound

Acoustic foam can be installed on the walls, and also on the media room ceiling. It is specifically designed foam, manufactured from bubbles of the proper size, and materials to absorb the maximum frequency ranges from the lowermost bass to the maximum audible pitch. The best quality acoustic foams are shaped like protruding spikes or pyramids which increase their total surface area, and thus maximize the sound absorption.

If you consider that acoustic foam is too much for you, you can have acoustic curtains instead, but you may not realize the same effect of sound dampening. Also, it is not easy to suspend curtains from the ceiling!

Soundproofing flooring

Even though no one may be living in the room below, still it is important to install acoustic flooring or soundproof flooring in your home theater or media room. It is not for stopping the sound to enter in or get out via the floor alone, but to stop the reflections of sound off the floor. The reflections will be particularly strong in the case of wood floor or tiled floor, or generally any hard floor. You can reduce reflections considerably by using heavy, thick carpeting on your floor. The other choice is underlayment under the carpet, like cork, or specially made underlayment of acoustic plastic.

Why are acoustic foam and soundproof flooring so important?

Two reasons, first, to prevent the sound leaking out of the room. Without soundproofing, it will disturb the people who are not watching the film.

Second, to prevent the reflection of sound off the wall, the ceiling and the floor it is important to reduce sound reflections as much as possible in the home theater. Think of the large amounts you have invested in sound reproduction systems like HD TV, and big screen projectors. True reproduction of sound is necessary to bring out the best out of these systems as envisaged by the sound engineers and you want to achieve that. Therefore, it is very important that you have to minimize the unmanageable sound reflections within the room. So you must add extra soundproofing to enable sound producers to retain the best possible control of sound experienced in the home theater. If you need any advice on any issue related to the above, you can contact the Interior Game, who has experts on this subject.

Soundproof Flooring and Acoustic Foam A Great Home Theater With Acoustical soundproofing Products by contractors and consultants in Mumbai, Bangalore, Chennai, Hyderabad, Goa, Cochin.

Our Acoustical Soundproofing Products and services

Wooden curtains, blinds for windows, how to setup a recording studio in your home, home design, home interior products, house design, adjustable bed, soundproof ceiling factory, acousti-gasket tape, interior ceilings, false ceiling contractors Bangalore, false ceiling contractors in Bangalore.

False ceiling dealers in Chennai, false ceiling contractors in Chennai, mass loaded vinyl alternative, acoustic board, poly max acoustic panels, theme based interiors, SEPS insulated decorative wall panel factory, sound absorption material suppliers, soundproofing a gymnasium, sound absorbing materials suppliers, cheap baffle ceiling, noiseless acoustics, echo eliminator, soundproof curtains India.

Call us for the best acoustical and soundproofing Services.

September 13, 2018

Acoustical Soundproofing Products for Auditorium Acoustics by Acoustical soundproofing Contractors

Acoustical Soundproofing Products for Auditorium Acoustics

Challenge of Soundproofing

Auditorium design is expected to ensure equal and good clarity of real sound to everyone in the audience no matter where they are seated. Whether it is public speakers, musicians, performers or singers all expect an auditorium with quality soundproofing so that each word is clear and there is great harmony in the music rendered. The audience on its part wants to enjoy superior acoustics with least “dead” or “live” spots in the hall.

The acoustical materials identified for soundproofing in an auditorium must have long life and decorative properties, with fire rating of class A and must have the ability to absorb reflections of sound to control background noise, and must also be able to disperse the sound waves to provide more balance and exposure to the sounds coming from the dais.

Soundproofing Auditorium

By installing decorative, fire rated wall or ceiling sound panels the sound reflections and also their reverberations inside the auditorium can be regulated better to convey better quality sound. The sound waves that reverberate inside the auditorium will fall on specially made sound panels and will be converted into kinetic energy. The reflected waves of sound will be scattered by diffusion panels to balance the dead and live spots inside the auditorium. Also, sound panels must be installed as a backdrop to the stage or at the rear side of the musicians for regulating reverse echo. The model auditorium is typically fan shaped having a curved or sloping ceiling and the floor inclined and sloping down in the direction of the stage. This shape ensures the breaking up of standing waves of sound.

Acoustic Results in Auditorium

By installing soundproofing acoustical panels in an auditorium you can receive and convert the unwanted background noise thereby minimizing the time of reverberation to within 2.0 seconds. What results is better speech clarity leveling out the musical tones. The diffusion panels distribute the noise and improve the balance all over the auditorium regardless of the location of seats. Thus the audience gets an enjoyable experience and this will ensure that they return to the auditorium.

More Soundproofing Tips for Auditorium acoustics

Modern auditoriums have inclined surfaces that facilitate the breaking up of standing waves. Averting “dead” spots and dispersing the sound waves in the hall are the other two functions achieved. If your auditorium is shaped like a gymnasium, you will have repeated reflections of wave of sound. This will enhance the chance of “dead” and “live” spots, and hence you may need more numbers diffusion panels. Remember that absorptive panels reduce background noise, while diffusion panels distribute the reflection of sound in different directions for improved acoustic balance in the hall. For auditoriums in the shape of fan with sloping floors, the ratio between diffusion panels and absorption panels should be 10-1. The idea is to absorb enough background noise to create perfect speech clarity, and at the same time leave enough reverb in the room to mix together the musical tones.

Acoustical soundproofing is an integral part of interior design and decoration. Interior Game offers consultation on design, soundproofing and seating of auditorium.

Our Products and Services in Acoustical soundproofing

False ceiling contractors in Chennai, mass loaded vinyl alternative, acoustic board, poly max acoustic panels, theme based interiors, SEPS insulated decorative wall panel factory, sound absorption material suppliers, soundproofing a gymnasium, sound absorbing materials suppliers, cheap baffle ceiling, noiseless acoustics, echo eliminator, soundproof curtains India.

October 7, 2017

Interior designing is everything

Building an interior in a house or in a commercial place gives value for the establishment. Imagine a building without interior and exterior development? Would you agree that is a valid living place? A big No, A place for living means have to be arranged with necessary materials and furniture in it. It is learnt that any room or a closed place should have some basic designs and decorations to make the place livable. Interior decoration is an identity and the interiors can tell the taste and the culture of the owner and, of course, the wealth and status of the owner to the visitors.
Interiors are the statement of the owner that says what he likes and what not to be. A sense of ownership can be seen in the interior designing and construction of any room or a place for business. The interiors are the showcase of the lifestyle of the users of the construction. Constructing interiors should serve the purpose for what it is constructed? It should be elegant and ecstatic and should not make boring after a view visits and spend time in that. It should be new on each and every visit made to the interior of any place.

October 7, 2017

Interiors with a taste of acoustics technology

Interior decoration without considering the health and mood of the people cannot succeed. It cannot impress the audience, if there is a noise problem that reduce the quality of the sound. Sound is one of the major issues we face in the self erected home theaters. Some people may rightfully think that we don’t need an expert to build our own home theater,but actually constructing an interior is not that much easy task. We need to think about the design factor scientifically. Use of complete science related to health issues.
Some colors are harmful for us if viewing continuously. For example if the red color employed in most of the parts of the interior increase the blood activity. And at the same time yellow and the orange are gives us a fresh energy that helps us to make the day without any stress and tiredness. White and blue colors provides us a peaceful and calm atmosphere.
Acoustics technology is an added value to the current world of interior designing and technology. it provides many safety factors for our health. The professionals in “Moov Group” are well trained to handle any issues in the home theater. Interiorsin.com company Moov Group company provides the acoustics technology those who want the best in sound engineering and clear audio visuals to enjoy the home theater well. Where ever we see pubic crowed there might be some noise except library and Temples and mosques while praying.
Viewing any cinema with sound issues harm our ears and over a period of time health. The best home theater should deliver the purpose for what it has been developed and constructed. it needs a great professional skills to make the home theater cinema viewing experience a wonderful one.
Remember us wherever there is a sound and noise pollution call us for a free consultation and spot visit to understand and solve the issue. Moov Group,with a vast experience and knowledge base assures you to solve the soundproofing issues.
Phone No: +971 4331 0000
Mobile: info@moovtechnology.com

October 5, 2017

Bedroom Designing and decoration – Bed Linen designing tips and guidance

A COT BUMPER Use washable fabrics and quilt the bumpers with heavyweight polyester wadding. The instructions here are for a bound edge – but bumpers can equally well be finished with a frilled or piped edge. Measure across the inside of the top and half way down the sides of the cot and Decide where the ties should be positioned – the top edge of the bumper should be tied to corner posts and to bars half way down the side of the cot. If the cot has a solid headboard, make long ties which can fasten around the back of the headboard.

Cut main panels of fabric and a layer of wadding to the finished measurements. Join widths of fabric with flat seams and the wadding with a lapped seam if necessary. Cut a 15cm wide strip to bind the edges of the bumper; these strips need not be cut on the bias since they do not have to be eased around curves. Cut four ties, 20cm long and the 5cm wide.

Sandwich the wadding between the two panels of fabric, right sides outwards; pin, then tack together all around the edges. Tack at intervals to hold the layers in place while you stitch the quilting – tack along the length of the bumper for vertical stitching, or up and down for horizontal quilting.

Turn under 2.5cm down each long edge of the binding, position on the inner side of the quilted panel, with the raw edge of the binding 2.5cm from the edge of the panel, right sides together. Stitch along the fold line, making tucks to turn the corners.

Turn the binding over to the outside of the quilted panel and slipstitch in place by hand or machine just inside the previous line of stitching. Make up ties by turning in 12 mm (! in) down each long edge and then folding in half, press and stitch, turning in the ends. Stitch the center of each tie to the appropriate point on the outside of the binding by hand. Do not make the ties too long; if they were to come untied, they could become entwined around a baby’s neck.

POCKET STORAGE A simple fabric pocket storage system, hung on the back of the door or at the foot of the cot, can be used to store baby-changing equipment or small items of clothing. Decide on a suitable overall size for the storage system: about 60cm wide by 100cm (40 in) deep is suitable for most needs. Plan the size and number of pockets: the instructions here are for three rows of pockets across the width of the panel, 30cm.

October 5, 2017

Herring bone stitch – Stitching style to design and decorate

Herring bone stitch

Sandwich the three layers together, with the wadding in the middle and the main fabric and lining right side out, tack together all around the outer edge. Make lines of tacking stitches diagonally or in parallel lines across the panel, a bout 10 cm apart. 2 Quilt up and down the panel by machine. Trim the quilted panel to the finished measurements of the bedspread and round off the corners if required. If the bedspread has to fit over the frame of a bed, cut out the corners so that you can arrange the overhang neatly around the bedposts at the foot of the bed.

Cut lengths of binding on the bias, making one strip long enough to fit all around the outer edge of the quilt and one to fit across the top. Join lengths as necessary. The binding should be about 8cm(3 in) wide. Turn under and press 2 cm G in) down each long edge, and fold in half and press. Position the binding around the outer edge of the quilt and stitch in place by hand or machine. Make up further strips enough to fit the width of tl strips so that each one starts fabric in the sequence. Press a clip across corners of seam all Join the strips in the same ‘A being careful to take precise allowances. Check the array strips before stitching so diagonal bands of pattern.

Make up the quilt with panel and a piece of wadding the patchwork panel, and when joining triangle square, match the raw edge resulting seam will be incorrect, If the quilt is to fit over a brass or wooden bed frame, cut out the corners of the quilted fabric to accommodate the bed posts before applying the binding.

October 5, 2017

FITTED COVER WITH INVERTED PLEATS – Interior designing and decoration tips

FITTED COVER WITH INVERTED PLEATS

This cover has a top panel with piped edges, and a straight skirt with inverted pleats at the corners of the foot of the bed. Calculate the finished measurements for the bedspread – the overall length and width of the top panel and the depth of the skirt. Cut a rectangle of fabric for the top panel, allowing a 12 mm U in) seam allowance all round. Cut a piece of lining fabric the same size. Cut an? Join the sections for the skirt, adding 40cm (16 in) for pleats at each corner.

Allow a 12 mm seam allowance along the top edge and 5cm for double hems all around the sides and lower edges. Make up sufficient piping to fit all around the sides and lower edge of the top panel. Join fabric to make up a top panel if necessary. Round off the corners at the foot of the bed for a less severe shape, position piping all around the sides and lower edge of the top panel and tack and stitch in place using the zipper foot, taking a 12 mm seam allowance.

Clip into seam allowances as necessary to fit the piping around the corners. If the corners are rounded, lay the cover on the bed and mark the position of the pleats at the corners of the top panel with pins. Turn under 2.5cm double hems down the sides and along the lower edge of the skirt, mitring the corners. Measure and pin pleats to fit at the corners of the bedspread, and then stitch across the top of the pleats, just inside the seam line. Position the skirt around the sides and lower edge of the bedspread, with right sides facing and raw edges matching.

Clip into the seam allowance of the skirt at the corners if necessary to help the fabric lie flat. Pin and tack in place, following the line of stitching which is holding the piping in place. Layer the seam allowance. Position the lining over the top panel, right sides facing and raw edge matching, stitch across the top edge, and turn the lining to the wrong side. Turn under 12 mm U in) all around the lining and slip stitch in place, enclosing the raw edges of the top panel, the skirt and the piping.

MAKING QUILTS A simple throw over bedspread in quilted fabric gives a smart finish and provides an extra layer of warmth over blankets or a duvet. In warmer weather, the quilt and a flat top sheet alone provide ample bed covering. Although ready-quilted fabric and ready- made quilts are available, by quilting your own fabric, you can alter the spacing, direction or even the shape of the quilting to suit the fabric. A straight striped fabric, for example, is particularly effective quilted with parallel lines of stitching, following the stripes of the fabric. For more elaborate detail, shape the quilting to outline bold motifs in a pattern.

QUILTED THROW OVER Cut a panel of main fabric, the size of the finished bedspread plus 10 cm (4 in) all around. Cut the wadding and lining fabric (preferably in a contrast fabric, as the throw over is reversible) to the same size. 1 Join widths of fabric with a flat seam, and butt widths of wadding together, joining them with zigzag stitch or by hand with.

October 5, 2017

Making Bed spreads for the interior designing and decoration

MAKING BEDSPREADS

By making your own bedspreads, you can ensure a good fit and perfect match to other furnishings in the room. You can devise your own finishing touches and embellishments – quilting in patterns outlining the print of the fabric, or ‘adding an unusual trim, piping or binding, for example. When measuring up for a bedspread, note whether the pillows and bedding should be in place. When cutting out fabric for a double bedspread, it is important to position the seams down either side of the top of the bedspread, close to the sides of the bed: this avoids having an unsightly central seam and gives a more professional finish to the cover.

Fitted covers lie more smoothly on the bed if the top panel is lined and interlined; the sides need not be lined, although this gives a smart finish to tailored covers.

A THROW OVER

This simple, floor-length throw over cover has rounded corners at the foot of the bed, and is lined and interlined. Decide on the overall finished dimensions of the bedspread: it can just touch, or trail on to the floor. Cut out the fabric to make up the main panel, allowing 5 cm turning all around the sides and lower edge, and 2.5cm across the top. Cut the interlining with a 2.5cm turning around the sides and lower edge, but no turning allowance across the top. The lining should be 5 cm smaller than the main fabric around the sides and lower edge, with the same turning across the top.

If you need to make seams in the layers of fabric, position a full width of fabric down the center of the bedspread with narrower widths joined selvedge to selvedge down each side edge. Use flat seams for the main fabric and lining, and abutted seams for the interlining. Round off the lower corners of the panels, using a large plate or paper template, and check that the corners match. Position the interlining on the wrong side of the main fabric and lock stitch in place leaving the appropriate turning allowance all around.

Herring bone stitch the interlining to the main fabric around the’ outer edge. Turn under and press the seam allowance across the top edge of the main fabric, over the interlining. For a hand-finished cover, turn up the 5 cm (2 in) hem allowance on the main fabric, rolling the interlining up without pressing a crease. Press under a 2.5cm turning all around the lining. The lining may be fitted by hand, or stitched by machine. Position the lining on the wrong side of the fabric and lock to the interlining. Slipstitch the lining to the main fabric all around the sides 2 and edge of the cover close interlining. For a machine-stitch the lining on the inter sides together.

October 5, 2017

How to use bed linen for interior designing and decoration – Tips and guidance

BEDS & BED LINEN

BED SPREADS

For centuries, sumptuous bedspreads, coverlets and quilts have been important elements of bedroom furnishing. Crimson silk worked with gold thread was the stuff of royal fourteenth- century quilts; Henry VIII’s bed also boasted splendid covers quilted in gold and silver; humbler Tudor households made do with embroidered linen and serviceable woolen blankets. Washable, brightly printed Indian chintz bedspreads, known as “palampores”, were first seen on European beds over 300 years ago and were imported from Madras by the East India Company; contemporary regal four posters, however, favored more elaborate bedspreads of damask and velvet.

Marriage quilts were something special- Victorian girls would spend years stitching their own – and in colonial America, betrothed girls would be expected to stitch at least twelve everyday quilts as well as a marriage quilt for a trousseau. Styles, colors and fabrics Bedspread fashions may come and go but for cottage and attic bedrooms a traditional patchwork quilt teamed with a simple iron, pine, or painted bedstead is a recipe for success.

Grand, more formal beds can take a dressed-up patchwork quilt. A frilled or pleated valance showing below gives a variety of different effects. The fabric could echo or contrast with colors in the quilt, bedhead, window dressing or upholstery fabrics. Quilts and bedspreads in children’s rooms in pastel-colored fine cotton prints with embroidered angles edges look enchanting appliqued with alphabet or animal motifs.

For more unusual applique inspiration, say, in an Edwardian-style child’s bedroom, Kate Green away’s characters would also look appropriate worked in typically muted grey-greens, blues, cream and terracotta. Lace and crochet bedspreads always look feminine and pretty, providing a soft, glamorous contrast to sturdy brass and iron bedsteads.

BEDS & BED LINEN fortunately, it is not hard to find new versions of authentic nineteenth-century lace designs as these are still being made. A fine white or cream voile or lace ‘overspread’ with a gathered skirt can cover an existing chintz quilt for an exciting new look and give added protection at the same time. Throw over bedspreads consisting of a simple hemmed sheet are useful in informal bedroom schemes and are quick and easy to make.

For grander beds needing a more luxurious, finished look throw overs can be quilted and lined with a complementary coordinating fabric in a tiny geometric print. Alternate bed covers according to the season with a heavy quilt for winter warmth and a light cotton cover for the summer. A tailored bedspread with a paneled or pleated skirt lends dressed-up dignity to a four poster.

In one-room apartments and spare bedrooms the bed needs to blend in unobtrusively as part of a seating arrangement. Suitable fabrics here could be a plain linen union or cotton pattern or paisley prints in sophisticated burgundy, navy, charcoal and bottle green will also work well. To add interesting detail, pick out the piping and pleats in a fabric to match the curtains and upholstery.